Widgets Help Feedback To bookmarks

Calculators

Foundation

Strip foundation Slab foundation Column foundation

Walls

Frame house Bricks Building blocks Foam blocks Aerated blocks Ceramic blocks Wooden beams Wooden logs

Roof

Lean-to roof

Fences

Metal sheet fence Picket fence

Heat

Underfloor heating

Materials

Electrical cable Heavy concrete Light concrete Mortar Insulation Floor materials

Sheet Metal Fence Calculator

In order not to calculate this side, specify the value 0.
Units of measurement - meters. Side length Ameters
In order not to calculate this side, specify the value 0.
Units of measurement - meters. Side length Bmeters
To avoid calculating this side, specify the value 0.
Units of measurement - meters. Side length Cmeters
In order not to calculate this side, specify the value 0.
Units of measurement - meters. Side length Dmeters
The height of the fence from the ground.
Units of measurement are meters. Fence height meters
Type and cross-section of fence posts.
The units of measurement are millimeters. Pipe for posts mm
Depending on the method of fastening the log, the pitch or the distance between the posts.
Units of measurement are meters. Posts pitch meters
Calculation of the uniform distance of the installation of posts along the entire length of each side of the fence. Calculation of the uniform pitch of Posts
The method of installing posts in the ground. Post installation
The diameter of the holes in the ground for the installation of posts.
The units of measurement are millimeters. Diameter of holes for postsmm
Cross section and thickness of the rail between the posts.
The units of measurement are millimeters. Rail parameters mm
The number of rails between the posts.
Units of measurement - pieces. Number of rails pcs
The thickness of the metal sheet.
The units of measurement are millimeters. Sheet metal thickness mm
The width of the metal sheet, taking into account the overlap.
The units of measurement are millimeters. Sheet metal widthmm
The total length of the fence 160 meters
The total area of the fence 320 m2
The length of the post 3 meters
Number of posts 54 pcs
Uniform pitch of posts on side A 3 meters
Uniform pitch of posts on side B 2.94 meters
Uniform pitch of posts on side C 3 meters
Uniform pitch of posts on side D 2.94 meters
Number of rails of length 3 meters 108 pcs
Number of metal sheet size 2x1.1 meters 146 pcs
Number of fasteners 1460 pcs
Total weight of posts 582 kg
Total weight of the rails 544 kg
Approximate total weight of sheet metal 1440 kg
Volume of material for fixing with stones 1.53 m3
Cost
Cost of posts 810 $
The cost of the rails 640 $
The cost of sheet metal 960 $
The cost of fasteners 73 $
Total cost 2483 $

Information on the purpose of the calculator

The metal sheet fence calculator is designed to calculate the amount of materials required for the construction of an enclosing structure consisting of posts, logs and metal sheets of profiled flooring.

The calculation can be performed both for the entire perimeter and for each individual side. To do this, you need to specify the length of only the calculated side. The depth of the hole will be calculated automatically, depending on the height of the fence. Since the metal sheet has a high "windage" in contrast to the picket fence and mesh fences, their fastening must be carried out especially carefully to counteract wind loads. It is also desirable to use roofing screws for fastening, with a special rubber spacer, to prevent the appearance of rust in the attachment points.

In strongly heaving soils, such as clay, it is recommended to mount the posts by the method of backfilling, in order to avoid squeezing the concrete base out of the soil, or to increase the depth of installation of the posts below the depth of freezing of the soil.

The default cost calculation is specified for example, for an accurate calculation, enter the actual cost of materials in your region.

A drawing in two projections is attached to the calculation, for a visual display of the placement of posts along the entire length of the fence side with the calculation of a uniform installation step.

The following is a complete list of calculations performed with a brief description of each item.

General information on the results of calculations
C ( ) / 7 8 9 x 4 5 6 + 1 2 3 - . 0 =